Nano Silver Wire

Color: Gray/Green
Concentration of solids: 1.5 wt%
Solvent: Mili-Q Ultrapure water
Average diameter: 22 nm
Length: > 5 μm
Coefficient of variation: 21.3%
Hydrodynamic radios: Not reported
Zeta potential: Not reported
pH of suspension: 5.6
Morphology: Wires, Fibers, Whiskers
Metal Purity: >99%
Shape purity: >90% Wires/Fibers/Whiskers
Particle surface: Polyvinylpyrrolidone
Particles concentration: Not reported
Surface area: Not reported
Composition: Silver, Polyvinylpyrrolidone
Expiration date: 6 months
Stock temperature: 4 oC

Microbial H-Cell (100 mL)

Technical Specifications:
• Flange OD: 40 mm
• Tube OD: 30 mm
• Inside diameter: 26 mm
• Volume per bottle: 100 mL

Included:
• 2x 100 mL Bottles (with three ports)
• 1x NW25 Clamp and Seal Set NW25
• 2x Closed or Open Caps for the Tops (Depending on the configuration that is selected)
• 2x Septum, TF / Silicon Seals for the Top Open Cap (Depending on the configuration that is selected)
• 6x GL14 Open Caps for the Sides
• 6x Septum, TF / Silicon Seals for the Side Caps

Storage 30

Technical Specifications:
• Storage Volume: 2 X 30 cm3
• Dimensions (H x W x D): 3.5″ x 2.2″ x 1.6″ (90 x 55 x 40 mm)
• Weight: 1.7 oz (48 g)

Single Electrolyzer Kit

Specifications:
• Permissible Voltage: up to 2VDC
• Permissible Current : up to 1.5A
• Hydrogen Production: up to 10mL/min
• Oxygen Production : up to 5mL/min
• Electrode Area: 2.9 cm²
• Requires Commercial distilled (deionised) water with a conductivity of < 2 μS/cm
• Dimensions (H x W x D): 2.0″ x 2.0″ x 1.6″ (51 x 51 x 41 mm)
• Weight: ~2oz (58 g)

Electrolyzer 65

Specifications:
• Hydrogen Production Rate: 65 cm3/min
• Oxygen Production Rate: 32.5 cm3/min
• Hydrogen Storage Volume: 80 cm3/min
• Oxygen Storage Volume: 40 cm3/min
• Power Consumption: 16 Watts at 4.0 VDC
• Permissible Operating Voltage: 0 – 4 VDC
• Permissible Operating Current: 0 – 4.4 A
• Permissible Operating Pressure: 0 – 5 mbar
• Electrode Area: 2 cells at 16cm2 each
• Operating Medium: Distilled Water
• Dimensions (H x W x D): 9.9″ x 9.9″ x 4.7″ (250 x 250 x 120 mm)
• Weight: 2.1 pounds (950 g)

Electrolyzer 230

Specifications:
• Hydrogen Production Rate: 230 cm3/min
• Oxygen Production Rate: 115 cm3/min
• Hydrogen Storage Volume: 80 cm3/min
• Oxygen Storage Volume: 40 cm3/min
• Power Consumption: 65 Watts at 14 VDC
• Permissible Operating Voltage: 0 – 14 VDC
• Permissible Operating Current: 0 – 4.7 A
• Permissible Operating Pressure: 0 – 5 mbar
• Electrode Area: 7 cells at 16cm2 each
• Operating Medium: Distilled Water
• Dimensions (H x W x D): 9.9″ x 13″ x 7.9″ (250 x 330 x 200 mm)
• Weight: 4.1 pounds (1,850 g)

Double Electrolyzer Kit

Technical Specifications:
• Hydrogen Production Rate: 20 cm3/min
• Oxygen Production Rate: 10 cm3/min
• Power Needed: 2.33 W
• Hydrogen Gas Storage: 80cm3
• Oxygen Gas Storage: 80cm3
• Dimensions (H x W x D): 3.5″ x 6.7″ x 5.3″ (90 x 170 x 135 mm)
• Weight: 10.2 oz (290 g)

Tutorial Pro

The Tutorial Pro allows you to run solar experiments to power the electrolyser and collect the generated hydrogen and oxygen gases in the storage tanks. Then, you can use the gases for the PEM fuel cell to generate power for either the H2/O2 or H2/Air mode. This kit also provides the opportunity to build a self contained solar hydrogen system or fill up a hydrogen powered model car with its’ own solar hydrogen station.

Features:

✔ Compact system on one base-plate
✔ Clear, self-explanatory set-up
✔ Sturdy construction
✔ Short setup time

Includes:

• Electrolyzer Cell 5
• x2 Storage 30
• Fuel Cell Hydrogen / Oxygen / Air
• PEMFC Kit
• Holder Set
• Vehicle Plate
• Solar Module Tutorial
• Fan Tutorial
• Banana Plug Cables
• Metal Base Plate
• Instructional Textbook